Fuel Tank Selectors

The idea behind the Selector is the option of mounting the fuel valve at any desired location. For the Choppers especially, where the fuel tank bottom shows, this device will keep the fuel tank bottom clear from hoses or petcock, also most stretched fuel tanks, and chopper tanks, are usually raised up in the front section and installing petcock in front or middle part of the tank, will not allow to drain or use all the gasoline in the tank.

The SELECTOR needs two hoses coming from the gas tank one for “ON” position and the other for “RESERVE”, hoses can come from the very end of the fuel tank, allowing you to use 100% of fuel capacity, In some applications cross over outlets can be used.

SELECTOR uses the same mechanism as our BALL PETCOCK with 90 degrees detent movement between “ON” to “OFF” to “RESERVE”. The second generation SELECTOR comes with two SWIVEL INLETS FITTINGS, (Industry First). In the “OFF” position both inlets and outlet are “SHOT OFF”, making it A REAL FUEL TANK SELECTOR not a fuel tank equalizer.

Like our Petcock the fuel SELECTOR gives you more fuel flow than you will ever need, it is 100% rebuildable with three stock O-Rings and five minutes of work. Our selector can be sold as unit with two holes mount back plate, or can be sold with one hole mount back plate.